Roofing Services

Roof Repointing Melbourne

Ridge, hip and gable repointing and re-bedding for suitable tiled roofs across Melbourne.

Roof repointing renews the flexible outer layer that helps secure and weatherproof ridge capping and gable tiles on a tiled roof. Over time, pointing can crack, separate or lose adhesion as the roof moves through heat, cold, wind and moisture. When the material fails, water and wind can reach the bedding beneath and ridge tiles may become less secure.

Request an Assessment →
Completed tiled roof with ridge capping in Melbourne
Overview

Repointing for Cement and Terracotta Tiled Roofs

Roof Guard Roofing provides roof repointing across Melbourne for suitable cement and terracotta tiled roofs. The inspection needs to determine whether the pointing alone can be renewed or whether sections of ridge capping must be lifted and re-bedded first.

Metal and COLORBOND roofs do not use this tiled-roof repointing system and should be assessed under metal roof repairs instead.

Basics

What Are Bedding and Pointing?

An inspection should look for movement, hollow or loose sections, cracked mortar, gaps, previous patching and water paths. Where the bedding has failed, the affected capping may need to be removed, the base renewed and the tiles reinstalled before pointing is applied.

Bedding

Bedding is the mortar base that supports ridge and hip capping tiles.

Pointing

Pointing is the flexible finishing material applied along the edges to help secure the capping and shed water. The two layers perform different functions, which is why simply covering failed bedding with new pointing may not provide a reliable repair.

Signs

Signs a Tiled Roof May Need Repointing

  • Cracks or gaps visible along ridge or hip capping
  • Pointing that has separated from the tile edge
  • Loose, rocking or displaced ridge tiles
  • Pieces of mortar in gutters or around the property
  • Water entry near ridge, hip or gable lines
  • Old patch repairs that have opened again
Process

The Roof Repointing Process

1

Inspect the ridge, hips and gables and identify areas of failed pointing or bedding.

2

Set up suitable access and property protection.

3

Remove loose and unsuitable pointing material.

4

Lift and re-bed capping tiles where the supporting mortar has failed.

5

Apply a compatible flexible pointing product to the prepared tiled-roof areas.

6

Check alignment, finish, drainage paths and surrounding tiles.

7

Clean the work area and explain any other roof defects observed.

Scope

Repointing as a Standalone Repair or Part of Restoration

Repointing can be quoted as a targeted service where the rest of the roof remains in suitable condition. It is also commonly included within a full tile roof restoration alongside broken tile replacement, valley or flashing work, cleaning and a coating system for suitable cement tiles.

Repointing on its own does not clean or coat the roof, repair every leak or replace failed valleys. Where the rest of the roof needs attention, a broader restoration may be the better match.

Durability

How Long Does Repointing Last?

Performance depends on preparation, roof movement, bedding condition, product selection, application and exposure. Rather than a universal ten to fifteen year lifespan claim, the quote and product documentation identify the selected material and the applicable workmanship or manufacturer terms.

Cost

Roof Repointing Cost

Pricing depends on the length and layout of ridge, hip and gable lines, roof pitch, height, access, safety requirements and how much re-bedding is required. A roof with isolated cracks is a different scope from a roof where most ridge capping must be lifted and reset.

Recent Work

Recent Roof Repointing Work

Roof Guard re-beds and flexibly repoints ridge, hip and gable capping on suitable tiled roofs to restore secure, weather-resistant joints. Recent Projects shows tiled-roof pointing work and the finished capping.

View Recent Projects →
Tiled roof with restored ridge capping

Why Choose Roof Guard for Repointing

Licensed & Insured

Work carried out by a licensed, insured Melbourne roofing team.

Qualified Roofers

Bedding and pointing completed by experienced roofers, not general trades.

Obligation-Free Quotes

A clear written quote prepared for your property after inspection.

Tiled Roof Focused

Assessment of ridge, hip and gable pointing on suitable cement and terracotta roofs.

Roof Repointing FAQs

What is roof repointing?

It is the renewal of the flexible pointing material around ridge, hip and gable tiles on a tiled roof after the area has been properly assessed and prepared.

What is the difference between re-bedding and repointing?

Bedding is the supporting mortar beneath the capping tiles. Pointing is the flexible outer finish. Failed bedding may need to be renewed before new pointing is applied.

Is repointing used on COLORBOND roofs?

No. Repointing is associated with tiled roof capping. Metal and COLORBOND roof issues require metal-roof repair methods.

Can repointing stop a roof leak?

It can address water entry caused by failed ridge or gable pointing, but a leak may also come from tiles, valleys, flashings or penetrations. The source needs to be assessed.

Can repointing be included in a roof restoration?

Yes. Where required, re-bedding and repointing form part of the preparation and repair stage of a complete tile roof restoration.

How much does roof repointing cost?

The cost depends on roof access, ridge length, condition and the amount of re-bedding required. A tailored quote is provided after inspection.

Arrange a Tiled Roof Repointing Inspection

If ridge or gable pointing is cracked, loose or separating, arrange an inspection to determine whether repointing alone is suitable or re-bedding is also required.

Get a Free Quote →